| Customization: | Available |
|---|---|
| Type: | Multi-Functional Beauty Equipment |
| Theory: | Laser |
|
Still deciding? Get samples of US$ 10000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The ZiXia Fairy CO2 Fractional Laser Machine
▸The non-stripping fractional laser includes theshuttle fractional laser, 1565nm laser,etc, lt is anon-invasive treatment, relatively mild, does notdamage the epidermis, the recovery period is short(2 to 3 days), the pain is low, and the risk ofpigmentation is small.Of course, the effect will alsobe weak, mainly for large pores, mild acne pits, redacne mark and so on.
▸The exfoliative fractional laser is mainly CO,fractional laser (10600nm), which is a minimallyinvasive treatment and damages the epidermis. Thesensation of pain is relatively obvious and requiresa certain recovery period (5-7 days), which isbetter than the non-stripping fractional laser.
Fractional laser technical principle
▸The firactional laser is a relatively new way of medical optical beauty, it changes the emission modeof light, is a minimally invasive treatment between invasive and non-invasive.
▸The principle is to make fine holes on the skin evenly by laser, which can directly penetrate into thedemis and fom three areas of themmal exfoliation, themal coagulation and themal effect in theskin layer, thus starting tissue repair, stimulating skin collagen regeneration, collagen reanangementand a series of skin reactions to achieve the purpose ofskin regeneration.
▸The fractional laser iradiation only a small part of the skin, in the tissue to produce a tiny three-dimensional columnar Themal damage Zone, called "Z" (Miaroscopic Themal Zone), while thesumounding tissue remains intact, through the migration and growth of sumounding active cells, toachieve rapid repair. At the same time, the fractional laser can penetrate the epidemmis into thedeep demis, and stimulate the fibroblasts in the interstitium of the demis cells to produce collagenmolecules through the action of light and heat The collagen molecules are gradually combinedinto ordlerly new collagen fibers, so as to repair the damaged and broken collagen, improve thecondition of the skin, and reduce a seres of skin problems such as linear stripes and stretch marks.
Application
*Skin rejuvenation (Uneven skin tone,large pores, rough skin, etc)
*Tighten the skin (Skin sagging, wrinkles,stretch marks, increase skin elasticity and gloss)
*Cicatrix(Atrophic scars, scars of trauma)
*Depigmentation (Remove superficial pigment)
*Remove tattoo (With a superpicosecond laser for tattoo removal)
*Recombinant collagen(Acne pits,Acne marks )
The benefits of using fractional laserinstruments and super picoseconds toremove tattoos?
1.Before used superpicosecond to remove tattoo,fractional laser allows the skinto have even small holes, andit can help open up skinchannels to dissipate heat(and also help with volatiletissue fuid).
2.The fractional laser has theeffect removing scars,which can improve beaccompanied by bumpyscars and reduce theprobability of scaring.
3.Stripping off the fractionallaser machine can removea small portion of theepidermal pigment, canachieve the effect ofremoving tattoos fasterand better.
| Technical Parameter | |
| Product Name | CO2 Fractional Laser Machine |
| Model No. | HQ-L4 |
| Use | Beauty salon/clinic |
| Lasers | Rf tube lasers,glass tubelasers |
| Screen | 10.4-inch LCD all-in-one touchscreen |
| Power | 60W |
| Laser wavelength | Spot mode+ private mode |
| Cooling system | Internal circulating coolant(no need to add water) |
| Scanning area | 20MM*20MM |
| Output graphics | Circles,triangles,rhombuses,squares,and six other shapes |
|
|
|
|
HOCHEY MEDICAL
HOCHEY MEDICAL CO.,LTD. specializes in Medical Gas Solutions and Furnitures.
We have a specialized human team of more than 300 employees and 120,000 m² facilities equipped with the latest technology, as well as 5,000 m² of showrooms where we can see and test all our products.
Factory is established in 1996, and there are workshops with 120,000 square meters. And now our hospital bed achieved full automatic production lines, so monthly production is more than 50,000 units.
We focus on constant innovation. We work on the continuous development and implementation of new standards for product quality and the efficiency of our service. As a result, we accumulate more than 2,000 registered technological patents and our products were approved by quality certifications: ISO9001, ISO13485, ISO14001, ISO18001, FSC, European CE, FDA of the USA, Russian Federal Register, Uzbekistan Register, Indonesia Register etc.. Products are tested by the 93/42/EEC and IEC 60601 safety standards.
Now our products are sold to more than 206 countries and places.
In all of this our R&D department is the key. Our production and comprehensive service model allow us to meet the objectives of our work philosophy: offer an optimal experience for our customers and contribute to the improvement and modernization of the global healthcare system. we continue to work effectively and enthusiastically, from each department and each of our staff.
We supply 24hours aftersales service
1.Technical support and guide
2.Free spare parts
3.Warranty:2 years
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485.
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit; If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order.
Q: What is your Min.order?
A: There's no minimum quantity.
){kind=link}